Setting akses telp keluar PABX - Panasonic

Setting akses telp keluar PABX-Panasonic

1. Harus cari No Jeck di Extension tersebut. Caranya:Handle pesawat tlp dalam kondisi tidak di angkat Program -> *#1234009 -> Store -> SP-Phone -> Store (Ext yg dituju nanti ada "NO Jeck")

2. Lock Ext / Open Ext. Caranya: Program -> *#1234601 -> SP-Phone -> Jack... -> Cos... -> Store

Cos 1 (Bebas)
Cos 2 (SLJJ)
Cos 3 (HP)
Cos 4 (Lokal)
Cos 5 (Kunci/lock)

COS 1 = Bebas Menelepon Keluar
COS 2 = Bisa SLJJ, HandPhone, Lokal, tidak bisa SLI
COS 3 = Hanya bisa Lokal
COS 4 = Hanya bisa Handphone
COS 5 = Hanya interkom, tidak bisa menelepon keluar. ----------------------------------------------------------
Pembatasan CO / line Ext Ring masuk
 408 > Sp-phone 2 X > CO 1 (pilih CO tombol Sp-phone) > # 01 (pilih tmbl FWD ) > Enable / Disable  ( pilih tmbl Mute ) > store > hold
 ----------------------------------------------------------
Muncul di layar tellr 'DND', pada pesawat PABX dial 710#

Panasonic KX-TDA100DBX

 

        Easy Migration to VoIP (IP / IP Telephony) Designed to support convergence via modular architecture, this IP-enabled system facilitates a smooth migration towards VoIP, allowing voice and data communication to function harmoniously within the same network, assuring additional flexibility in the future. Voice Mail Integration Optional Cards (ESVM) provide added message recording and outgoing message handling capabilities that help ensure calls from your customers routed through properly and are always answered or processed gracefully. 

Multi-Cell Wireless Integration Extension line phones can be made wireless. The multi-cell DECT Wireless System enables the office building to become a single call zone. Since calls can be made while working away from the desk, this contributes to improved productivity. 

Cost-effective Performance The systems include various functions to support cost reductions. Voice over Internet Protocol (H.323) ISDN capability (BRI / PRI) - QSIG digital networking allows basic call handling, closed numbering routing, and CLIP / COLP / CLIR / COLR Automatic Route Selection (ARS) / Toll Restriction Services (TRS) Reliable networking via T1 / E1, E&M.

Panasonic TD500 Login password

 

PABX TD500 Digital Super Hybrid sytem, ​​with a capacity of 192 line 448 extension, a PABX with a capacity fairly large for an office-scale medium or medium, PABX that is designed with the strength of a fairly durable and stubborn, as evidenced in a department number jakarta south, installed since 2000 until now not or has not suffered damage to the electronic system, there was only damage to the cable network, dropped by rats or trampled.

 Therefore, the number of such capacity, for the maintenance program maintenance consul shall use the application, running on Windows and in the protection system with password login.

To avoid by people who are not authorized to change the settings program2 or existing facilities in the system, then provide four levels of password to login. The problem is that in 1234 default password has been changed and forgotten? Setting back the way at the reset to factory defaults is quite time consuming if PABX system to hundreds of full extension is installed, can be curly finger click clack keyboards.

There is a freeware application that "win enabled" the ability to view or help us to know the password already replaced the condition at least we can enter the system with level password 4 or lows though, run win enabled, click the file menu, download PABX to pc, save , open the downloaded file earlier, you can access the system back to the highest level password.

Setting PABX TC 108

HOW TO PROGRAM MINI PABX TC 108

 

- Turn off the incoming ring * -41- no ext- Turn on the incoming ring * -41-no ext- The contents of the recording operator * -41- * talk (8 seconds)- Listen to a voice recording * -42- *- Activate the operator recording * -435- Non Activate tape operator * -435- Block extension * -1-no ext- # (ext only intercom)- Unblock ext * -2-no ext #- Block 1 * -1-digit initial no-digit ext early (eg * 130 = ext 3 can not DLD)- Unblock * -1-no-ext initial digit- Limiting the time / timer * -3-no ext-min (1-9 min, 0 = 10 min, * = 11mnt, # = 12mnt)- Open the barrier of time * -4-no ext- #- Research all data PABX * -438

Specification:- Program of ext 1- Transfer tel. Exit # - * - no ext

Setting way TDA100D

This article describes how to SETTING PROGRAM Panasonic PABX type TDA with Digital Telephone KX-DT333 SERIES OR KX-T7630.

Preparation:
Reset PABX.It is useful so that all the settings of the program back to default so that features running properly.
How to reset it: Raise switch on MPR card toward PABX System Initialize and wait 10detikkan turn off and turn on the PABX. After a few seconds, lowering switch in the direction of Normal, PABX is ready to be programmed with a factory default, this will allow us to start the program.
Program start:
The digital telophone aircraft jack plug in the first / first port on Digital card (if the card is in the slot Digital to 2 means dikonek to the first port in slot 2, the TDA 100D.
Go to the menu program:

[Program] [* # 1234]Then enter the code number of the program, on the telephone, to enter into the program code must press ENTER, Sp-Phone button being used more for heading selanjutnya.Jika menu there is a program, do not need to press the HOLD button to return to the original menu , simply press the CANCEL button will return to the program menu directory of program code that is being used.
Setting TRS level:

301 [Enter] to enterLevel No: 2 contents 2Fill with01: 00 Enter* Above code to restrict answering with prefix 00 (SLI prohibited, while DLD, HP, LOCAL allowed)2x press Enter phone screen there Posts Level No. (Fill with 3 then press enter)
Level No. 3 contents 3Fill with01: 01 Press Enter + SP-PHONE02: 02 Press Enter + SP-PHONE03: 03 Press Enter + SP-PHONE04: 04 Press Enter + SP-PHONE05: 05 Press Enter + SP-PHONE06: 06 Press Enter + SP-PHONE07: 07 Press Enter + SP-PHONE08: 09 Press Enter + SP-PHONE09: 080 Press Enter* Above code to restrict answering with prefix 08 (SLI and DLD prohibited, while HP, LOCAL allowed)2x press Enter phone screen there Posts Level No. (Fill in 4)
Level No: 4 contents 4Fill with:01: 0 Press Enter* Above code to restrict dialing prefix 0 (Only LOCAL allowed)2x press Enter phone screen there Posts Level No. (Fill in the 5 then press enter)
Level No: 5isi 5Fill with:01: 1 SP-PHONE + Enter02: 2 Enter + SP-PHONE03: 3 Enter + SP-PHONE04: 4 Enter + SP-PHONE05: 5 Enter + SP-PHONE06: 6 Enter + SP-PHONE07: 7 Enter + SP-PHONE08: 8 Enter + SP-PHONE09: 9 Enter + SP-PHONE10: * Enter + SP-PHONE11: # Enter* Above code to restrict dialing prefix 1-2 (Block)Press the [Hold] to return to the menu system program.
Specification:If this setting has been completed, it will form a standard valueCOS 1 = Free Calling OutCOS 2 = Could DLD, Mobile, Local, can not SLICOS 3 = Only can LocallyCOS 4 = Just get MobileCOS 5 = Only intercom, could not call out.Programming:For a complete list of program code can be found in the list of program code TDA
Setting Line / Trunk attached:In the TDA, the amount of line that can be installed depending on the card, there are 8, 16, but not all line port is used. Depending on the number line that we can from the provider (telecom number, GSM, etc.).If the line is there is no such ONLY 6, then the rest (7-8) should we turn off or Out of Service, in order not drawn a blank line when going to call out.Here's how:Admission to the program

[400] [Enter] [Slot No. installed a CO Card] [Port Number: Fill unused port] select using the [Auto Ans] to display the screen [No Connect] [Enter]Press [Sp-Phone] or the [Down] to move to the next port.Repeat until all unused ports didiskonek of PABX.

Call Costing Engine

The telephone call costing engine, currently used in InfoDEN’s PABX Call Logger , is fast, compact, configurable and is capable of being integrated into third party applications across multiple platforms. The call costing engine’s potential uses include:

Internet based call costing - the call costing engine can be licenced for use by any web site requiring an accurate telephone call costing function. The costing engine creates its charging tables dynamically based on the “calling from” phone number and is therefore capable of accurately processing costing requests and returning the processed calls in the required format. The costing engine can also process each call costing request using up to 256 user defined and configurable carrier costing tables. This is ideal for sites wanting to provide carrier comparison reports or individual telecommunications carriers/resellers wanting to provide a call calculator service for their customers.

Call Accounting Applications – the costing engine can be licenced for use by third party software developers wanting to rapidly enter the call accounting market. These developers can then focus their efforts on the userability, reporting and networking funtions of their programs. This option is also available to existing call accounting developers who are unable to keep up with the ever changing manner of the telecommunications industry. International developers will also find this an attractive option when analysing the feasibilty of entering the Australian market. 

Other Software Applications - the costing engine can be licenced for use by third party software developers wanting call costing functionality in their software applications. This may include developers of CRM, accounting or phone dialler applications where call accounting is not the core use of the software, however its inclusion will provide benefit to users and a competitive edge.

PDA Applications – a great opportunity awaits any developer wanting to exploit the costing engine’s power on Windows CE devices. Currently we are not aware of any call costing based applications available for Windows CE.

Apple OSX – as with Windows CE, an opportunity also awaits any developer wanting to use the costing engine on the Apple OSX platform. Currently we are not aware of any call costing based applications available for Apple OSX.

The costing engines features include:

SPEED – The costing engine can process 100,000 calls in less than 2 seconds.

INTERNATIONAL PORTABILITY – Costing tables are currently available for Australia, New Zealand, Papua New Guinea and the United Kingdom. Costing tables for other countries will be developed as required. This allows the costing engine to be integrated into third party products for sale in multiple countries.

SIZE – The size of the costing engine is only 341KB including telephone numbering plan and one carrier’s rates. Each additional carrier rate table adds an extra 4KB to the application. Therefore, adding the costing engine to an application does not diminish the ability to distribute that product via the Internet. The costing engine can also run on Windows CE handheld PDA devices.

GENERIC RATE TABLES - The costing engine uses a single set of costing tables to calculate call costs for every charging zone throughout Australia. Therefore a single version of any product using the costing engine can be distributed to every region in Australia without the need for site specific table customisation. This also simplifies rate updating as one set of files can be distributed to all customers.

RATE VALIDITY – Each carrier rate table can have multiple rates running across different date ranges. I.e. the ability to include rate expiry dates allows rate changes and specials to be applied accurately.

HTML CONVERTER – A Universal Converter has been developed to automatically extract the National Numbering Plan details contained in various soft copy formats and convert it into C++ code. This is an efficient means of maintaining the numbering plan tables and allows updates to be implemented quickly and reliably.

FILE STRUCTURE – The costing engine does not use a conventional database to store costing related information. All costing parameters are stored in InfoDEN’s proprietary file types thereby eliminating the processing overhead imposed by database applications. 

NETWORKABILITY – The costing engine can be run in a distributed environment. It can service clients on many machines across a network as it is developed using the Component Object Model (COM) interface specifications.

PLATFORMS – The costing engine has been written using the C++ programming language and can be compiled to run on multiple platforms including Windows 95/98/ME/2000/XP, Windows CE, MAC OSX, Unix and Linux.

(source from: www.ipcortex.co.uk)

Driving Factor to Upgrade PBX System

It's not so much that the PBX features have changed, it's the technology delivering those features and your co-workers interaction that is changing.

In the end the choice to upgrade your voice communications system may not even be yours. Many PBX manufactures are embracing Voice over Internet Protocol (VoIP) and the newest technology, Session Initiation Protocol (SIP) as their new flagship systems while limiting the support of their Legacy TDM (Time Division Multiplex) systems.

Whether you have a small system or a large system, it's imperative as a Telecommunications manager that you understand the latest technologies and begin to blueprint when a system upgrade would make sense for your company.

Many managers are put off by the fact that they have to upgrade their telecommunication system - after all it's worked fine for many years. They are even more upset when they are notified or find out that the system they have is reaching or is end-of-life and will no longer be supported by the manufacturer.

What's the driving factor behind these changes? The short answer - Convergence.

Convergence views voice communications and data communications as a comparable information nucleus - they are doing basically the same function. Passing data from an originating point to an end point. Voice communications uses dedicated paths to connect parties and data communications uses non-dedicated paths and protocols to send and retrieve information.

Is this the first convergent of seemingly different technologies? Not at all, the fax revolution of the 80's was produced by a convergence of telecommunications technology, optical scanning technology, and printing technology. There are countless other examples of convergent technologies on the market today.

When should you begin planning for your upgrade? The simple answer is of course; there is no time like the present.

As with any project you will need to make a presentation case for the project, outlining the immediate and future benefits to your company's business culture and the company's bottom line. I'll discuss three common driving factors, End-of-life schedules, culture/business shift and company reorganization.

I'll use Nortel's SIP Multimedia PC Client as an example.

1. Identify your current systems End-of-life schedule.

A. Pbx systems are comprised of software and hardware. In some system configurations, the hardware will follow a different end-of-life schedule than the software and vice versa.
B. You should review all aspects of your telecommunications system from the software, to the cards, to the telephone sets and catalog all concerns.
C. Upgrading your system outright to the latest and greatest may make more sense to the bottom line than continually upgrading the various parts of the system.

2. Determine if new systems features will improve your company's telecommunications culture.

A. Nortel's SIP Multimedia PC Client as an example offers many features beyond traditional telephony. It supports video calling, instant messaging, call screening, real-time call disposition, conferencing, file sharing, and white-boarding.
B. Advanced Web communications include pushing Web pages and co-browsing the Web with customers, co-workers, and associates
C. Virtual Office is always an exciting feature of the newer VoIP and SIP systems.

3. Company growth, downsizing or related projects.

A. Company growth is a good time to analyze your telecommunications systems. It might be cost-effective to embrace the new system features and create Virtual Private Networks (VPNs) that in turn, reduce your requirements on T1's.
B. If your company is downsizing in property. It might prove fruitful to allow the older systems to convey with the property, while focusing on re-growth and the newer systems.
C. If you company is engaged in related projects (Infrastructure upgrades, IT system upgrades, etc.). It is crucial that you as the Telecommunications Manager are part of the process to ensure that newly installed systems will communicate with your vision of the future for your Pbx department.

Of course there are other driving factors that are unique to each and every business and this article briefly touches on only a few factors. More important are the key factors in planning that can be categorized into anticipation on your part and the effective management of information, quality, and scope.

Anticipating changes in the telecommunications sector and taking advantage of those changes to benefit your company are paramount to a competent, executable plan. In addition, effectively managing the information, ensuring quality research and developing a scope of action will assist in the creation of a sound telecommunications project.

Whether you're just beginning the research process of upgrading your Pbx system or are well along in the process - PbxInfo.com is a great place to perform research, post questions and get answers about a wide array of systems.

Tips PABX: 4 Things to Know Before Buying PABX

PABX has now become a tool is needed for communication within a company or an office that has many telephone . Currently, many offices are willing to buy a PABX for small business or for the office , but still do not understand how to buy the right PABX .

In buying PABX for your office , there are some considerations that you should know that capacity PABX , PABX Price , Features and Upgrades PABX to PABX System . Here we will give 4 Tips you should know before buying a PABX following :1 . capacity PABX

It is the capacity of the PABX is the amount you need to use the PABX and the existing trunk line number in the PABX . Trunk lines are often referred to as CO Lines / Connections Public Switched Telephone Network to communicate with the outside world .

And it is in maskud with extension is the extension number of the phone that will be installed in the office . To determine the number of CO Line depends on the number of key posts that require direct connectivity to the outside of the phone .

If your office has a high marketing activities of course you need a CO line that is much more in comparison with that office just doing product development . CO line or analog to digital form . Number line for Analog Co. konksi regular PSTN line is and the amount of CO line for digital usually starts from 30 digital ports .The organization's future growth in the number of employees in a certain time is an important factor in choosing Type and Capacity PABX .2 . PABX Upgrade Capabilities

The second thing to note in buying PABX is the ability to upgrade in the PABX or the ability to add capacity . This is important because there are some PABX that can not upgrade capacity. PABX upgrade capability is important when you are developing enterprise IT .

It would be troublesome if you need more capacity in the use of PABX , PABX you earlier but can not be upgraded . Also consider the cost of the upgrade in the PABX purchases carefully , lest you get stuck with the high upgrade costs .

 3 . Price PABXPrice PABX is a very important factor in buying a PABX . Each person must look for a cheap price but on the other PABX low price you also consider the quality of the PABX . Aside from the price PABX itself you also have to pay attention to the price of the components in the system such as cable installation PABX , PABX Backup Power Supply , placement and rank system and others.

Sometimes PABX cheaper with the same configuration and load , can not perform its function well compared with PABX relatively more expensive . PABX system maintenance costs and vendor support in after sales service is another thing that should also be considered .

4 . features PABXNow the PABX has had a variety of features depending on the type and the type of PABX . But good  PABX features listed below :

    call transfer
    Caller ID
    call Conferencing
    Auto attendant
    call Forwarding

For advanced features such as voicemail , CTI ( Computer Telephony Integration ) is the current price is still high but CTI is very useful in the long-term use .

10 Reasons to Migrate From PBX to IP PBX

What is IP PBX ? IP PBX is a telephone system with features that provide complete telephone calls via the Internet ( Voice over Internet Protocol ) . The whole conversation is sent as data packets over the network . The technology includes advanced communication features highly efficient and of good quality .

Companies do not need to tamper with the existing communication tools but with the IP PBX can connect to traditional phone ( Telkom ) through VoIP Gateway , so that the company can still save the existing Telkom number .How does it work ?

IP PBX consists of one or more SIP Phone , IP PBX server and optional VoIP Gateway to connect to traditional phone lines .

The function of an IP PBX server is similar to the Proxy Server . Members register with the IP PBX server , and when making a call , the members will ask the client phone number that will be addressed . IP PBX has a directory that enables all members to communicate with each other internally or through a VOIP phone to the PSTN Gateway .10 Reasons to Migrate From PBX to IP PBX:

1 . It is easier to install and setup rather than the traditional PBX .IP PBX using software running on a computer with a processor utilizing just like Windows . In traditional PBX expert needed to install and maintenance process .

2 . It is convenient in maintenance due to use GUI interface / Web Based SystemsIP PBX can easily webbase dimaintenance use interface , facilitate the routing and configuration . While traditional PBX requires specialized technicians to perform the configuration .

3 . Significant cost savingsCan be integrated with VoIP providers such as international VoIP providers , local provider ( voiprakyat ) thus saving the cost of long-distance and international calls

4 . Negating the phone cordIP PBX connects a standard telephone via a computer network . On installation of a new building , not needed the telephone network , computer network enough , so that it can more easily when moved .

5 . Eliminate dependence on a single vendor .With the standard protocol VOIP , IP PBX vendors are free to use the standardization that has been specified .

6.Mudah in doing expansionAdditions / upgrades in the traditional PBX system requires hardware and modules that are relatively expensive . In some cases you will need a new system to be able to meet the needs of proficiency level . With an IP PBX , the upgrade can be done simply by adding a VoIP phone on a network that already exists .7 . Better customer service & productivityWith an IP PBX , service customer service easier and productive . Since the telephone system using a computer , you can integrate phone functions with business applications . For example : automatically record the missed calls . Phones can exit directly through Ms.Outlook or CRM system .

8 . More features as compared to a conventional telephone .With the IP PBX using the software , it is easy to develop and improve features . Most VoIP phone system is equipped with an auto attendant , voice mail , ring groups , advanced reporting and more . This feature is very expensive in the conventional system

9 . Facilitate " Hot Desking "Hot Desking is the transfer system from one place to another . IP PBX using a computer network , making it easy to removal .

10 . Features SIP PhoneSometimes to the conventional telephone conferencing setup required cost and advanced features . Unlike IP PBX that already has these features .

The IP PBX Can Do More Than Telephone

The continued growth of SIP-enabled devices beyond the SIP phone and SIP trunks opens up a whole range of possibilities. There are SIP enabled: Surveillance security cameras Access control devices such as badge readers and door controls Paging devices Gary Audin and Mario Cuello, CEO of Epygi, meeting at ITExpo Miami discuss in this podcast the traditional IP PBX and how it can also be the centralized system for a range of SIP-enabled devices. These devices go beyond what telephony personnel usually support. Since IT often manages telephony, IT can expand its functionality to non-telephony applications. The fact that the IP PBX can support these other devices eliminates the need for separate systems to manage them, a definite cost reduction. Epygi, through its reseller and customer feedback programs, has found that adding broader functionality to the IP PBX enhances the investment in the IP PBX and helps extend it lifetime value to the SMB.

Kiwi-ISP takes over PABX fraud

A Kiwi-ISP has decided to block phone calls to 28 countries after three of its business customers fell victim to hackers nd suffered large losses over just one weekend. Fairfax reported on Sunday that Orcon has blacklisted calls to mostly African and eastern European destinations, where termination charges can be as high as $18 a minute. Routing calls to such destinations through compromised PABX or switchboard systems is lucrative for fraudsters, with Orcon telling Fairfax that the three businesses lost a total of NZ$35,000 (A$31,000). The ISP estimated that in total its customers had lost hundreds of thousands of dollars to PABX fraud, which is why it decided to act to prevent the attacks that "would have been devastating" to small business customers. Last year, West Australian police said businesses in the state had lost tens, some hundreds of thousands of dollars in PABX-related call fraud. PABX fraud is a widespread problem and telcos such as Optus are warning [PDF] customers to take precautions against it so as not to run up bills in the tens of thousands of dollars in short periods of time. These include changing the often easily guessable "1234" or "0000" default pass code on PABX systems to something less obvious, using firewalls, blocking international calls unless necessary, as well as monitoring call volumes, especially outside normal business hours.

Omni PCX Enterprise call server

PBX stands for Private Automatic Branch Exchage . immediately wrote .. session on deeper PABX will be discussed more in ok .. The initial view Omni PCX Enterprise call server when in telnet : Then we enter the username and password : mtcl Then to change the ip configuration by typing the command : netadmin - m Option # 1 : to change the ip and gateway configuration . Option # 2 : to see that the configuration has been set up. Option # 3 : to view and update the configuration of the local ip that has been set up. Option # 4 : for setting up redundant cpu ( cpu standby ) if there are 2 cpu / call server . Option # 5 : for setting up ip role . Piiihan No. 18 : when it is in the settings on Apply and then select the No. 2 back to see the results of the configuration that has be set . Then to change the time and date to suit the desired hour we entered into swinst Then choose expert menu - > System Management - > date & time updates Follow the next langkah2 then type q to exit the menu . Previous climbing to the next step we also need to know what card card dipunya by alcatel . There are 2 types of PABX belong there alcatel OXO and Oxe . What we learned was that above including Oxe ( Omni PCX Enterprise ) while OXO ( Omni PCX Office ) customer dikebutuhan only difference , if OXO to the needs of small - medium , klo Oxe to the needs of medium -large . To learn both very long at all .. so bit by bit before yes

Be careful with PABX installation technicians who keep the password program

For business owners who are looking for or are the services of the company or the person handling the PABX must also know the password PABX program. Password PABX program is the key to a PABX. Without the password that we will not be able to enter the program to change all the settings PABX. Knowing the password is the right of every owner PABX PABX. Unless there is an agreement or contract. Although there is an agreement or contract should the password is known by both parties. This is to avoid future disputes. If we do not know the password PABX then we have to do is reset the PBX means that we should set from the beginning. Extension number, extension rings when a call comes in, the extension can make calls, etc.. Or we have to depend on it forever PABX technician in the maintenance of PABX.

Panasonic KX-TEB program and TES

First of all we have to do is install the KX-T7730 Series Keyphone at Jack's or at the first port. After all ready please press the button (Program) at the top of the monitor perhatiokan KX-T7730. After that please enter the password required (For the default password: 1234). Before starting the whole program better cleared first. - Time and Date Once the above step is successful you do, now begin to change the Time and Date. Still logged in the program, Press the number 000, in the KX-T7730 screen there will be a title Time and Date. After that press SPHONE. Please fill the hours and the time corresponding to the time when the program.

All terms PABX, Type, Brand, Features PABX

Private Automatic Branch Exchange , or better known by the acronym " PABX " This is a means of communication or a communication network system to connect the phone to one another in a network , one of the main functions of PABX certainly facilitate communication between users such as Intercom ( ext ) , Switch calls , and control the use or security in order to save the phone . and so forth . PABX generally may be seen in the office . The current era PABX can also be connected to the Internet so as to allow for the calls cheaper. The following terms are frequently encountered in the world PABX : PABX Main Unit , Central Box PABX , Key Telephone , SLT Phone , Cable Telephone , Telephone Box Connector , Analog , Digital , IP PABX , pbx , Voip , Installation , Program , Cable Terminals , crimping , RJ11 , Softphone , Billing System , Auto Attandant , extension , line , co, Trunk , Card Expand , Modules , and other Features and facilities : Music On Hold , Disa , OGM , COS , ARS , Password , Timer , Auto Lock , Intercom , Forwarding , DND , Paging , Alarm , Schedule , and so forth brand PABX Panasonic, LG , NEC , Samsung , Apaya , Ericson , Siemens , Alcatel , Nortel , Favorite , Sahitel , and so forth

Setting Standards Program PABX Panasonic TDA using Telephone

This article describes a quick way to program the PABX Panasonic TDA type using Digital Key Telephone . But this method is not recommended for setting up the program if a lot of features to be programmed , because the programming mode using the Digital Key Telephone , many of the features or settings that can not use a telephone line in the program , you should use UPCMC or software to program the type of Panasonic PABX TDA . preparation : Reset the PABX . This is useful so that all values ​​of the program back to the default value or the default value . How to reset : Raise the switch on the MPR card toward the Initialize System . Turn on the PABX . After a few seconds , put the switch in the direction of Normal PABX is ready to be programmed with a factory default value , this will allow us to start the program . Starting program : Aircraft digital telophone first plug in the jack / port first , the TDA 100D , no extentionnya 101 . If using Digital Card ( DLC , DHLC , etc. ) there is always a first port position . Go to the program menu : [ Program ] [ * # 1234 ] Then enter the code number , on the telephone , to enter into the program code must press [ Enter] , being the [ Sp - Phone ] were used to going to the menu selanjutnya.Jika no one program , no need to press the [ Hold ] to return to the home menu , simply press the [ Cancel ] , the sub menu will be returned to the appropriate program code of the program being dipakai.Setting TRS level : [ 301 ] [Enter ] to enter [ Level No. : browse 2 ] [ Location No. : 001 contents ] [ contents with a value of 00 ] [ Enter] and [ Sp - Phone ] to move to [ Location No. 002 : content 100 ] [ Enter] [ Cancel ] [ Cancel ] No Level Up screen display . [ Level No. : fill 3 ] [ Location No. : 001 contents ] [ contents with value 0 ] [ Enter] [ Location No. 002 : content 100 ] [ Enter] [ Cancel ] [ Cancel ] [ Level No. : browse 4 ] [ Location No. : 001 contents ] [ contents with nial : 00 ] [ Enter] [ Sp - Phone ] [ 01 ] [ Enter] [ Sp - Phone ] [ 02 ] [ Enter] [ Sp - Phone ] [ 03 ] [ Enter] [ Sp - Phone ] [ 04 ] [ Enter] [ Sp - Phone ] [ 05 ] [ Enter] [ Sp - Phone ] [ 06 ] [ Enter] [ Sp - Phone ] [ 07 ] [ Enter] [ Sp - Phone ] [ 0809 ] [ Enter] [ Sp - Phone ] [ 09 ] [ Enter] [ Cancel ] [ Cancel ] [ Level No. : browse 5 ] [ Location no: 001 ] [ fill in the values ​​: 1 ] [ Enter] [ Sp - Phone ] [ 2 ] [ Enter] [ Sp - Phone ] [ 3 ] [ Enter] [ Sp - Phone ] [ 4 ] [ Enter] [ Sp - Phone ] [ 5 ] [ Enter] [ Sp - Phone ] [ 6 ] [ Enter] [ Sp - Phone ] [ 7 ] [ Enter] [ Sp - Phone ] [ 8 ] [ Enter] [ Sp - Phone ] [ 9 ] [ Enter] [ Sp - Phone ] [ 0 ] [ Enter] Press the [ Hold ] to return to the menu system program . Description : If this setting has been completed , it will form a standard value COS 1 = Free Call Out COS 2 = Can DLD , CellPhone , Local , can not SLI COS 3 = Can only Local COS 4 = Can only Mobile COS 5 = Only intercom , could not call out . Programming : For a complete list of program code can be seen in the list of program code TDA Setting Line / Trunk installed : At TDA , the amount that can be attached tergantug line of cards , there are 8 , 16 , or 24 , but not all of the line used . Depending on the number line that we can from the provider ( Telkom numbers , gsm , and so forth ) . If the line is there is no such ONLY 4 , then the rest ( 5-6-7-8 ) we have to turn off or Out Of Service , so as not drawn a blank line when going to call out . How: Admission to the program [ 400 ] [ Enter] [ places Card Slot No. installed CO ] [ Port No. : Fill unused port ] select using the [Auto Ans ] until the display screen [ No Download ] [ Enter] Press the [ Sp - Phone ] or the [ Down Arrow ] to move to the next port . Repeat until all unused ports didiskonek of PABX . Setting Ring : For this ring setting , by default , though not in the program will ring at extension 101 . If you want to change it then it can be programmed in [ 450 ] The format is : [ 450 ] [ Enter] [ Time ] [ Slot No. ] [ Port No. ] [ Destination No. ] [ Enter] Description : [ Time ] = 1/2/3/4 Mode 1 for Day , 2 for Lunch mode , 3 for Break Mode , 4 for Night Mode . Default settings are not automatic mode , only Day Mode . [ Slot No. ] = 01 to 10 This no slots , depending on where the card is installed in CO PABX . [ Port NO ] = 01 to 16 Port where installation of the line from the outside . If there are only 4 line and installed sequentially , then the program enough to port 4 . [ Destination No. ] = Number Extension / ICD / OGM / Group etc. . It is the purpose of the line in port ring attached . If there is only one operator , then simply enter the no extension operator in [ Destination No. ] . Setting COS / restrict / restriction penelponan : To set an extension restrictions could call out , then it could be in the program at no program code [ 602 ] . The format is : [ 602 ] [ Enter] [ No Extension which will be restricted ] [ COS No. ] [ Enter] Description : [ COS No. ] as previously above information : The contents of 1 to 5 according to the facilities provided in the earlier extension . Setting Password : If there are some aircraft that locked access to call out , but could use a password to perform penelponan out , then it could be in 2 places in the program , ie no code [ 120 ] and code [ 122 ] The format is : [ 120 ] [ Enter] [ Location No. ] [ Verified Code ] [ Enter] for the program no: [ 122 ] [ Enter] [ Location No. ] [ PIN ] [ Enter] Description : [ Location No. ] is the password in place , the password or serial number . If we want to make for example the password 123456 , then the programming should be split into 2 , eg 123 and 456 . [ 120 ] [ Enter] [ 001 ] [ 123 ] [ Enter] [ 122 ] [ Enter] [ 001 ] [ 456 ] [ Enter] Eg would create 567 890 password : [ 120 ] [ Enter] [ 002 ] [ 567 ] [ Enter] [ 122 ] [ Enter] [ 002 ] [ 890 ] [ Enter] This is a simple program using a digital telephone , for standard features that are often used . Read more : http://suryawardana.com/pabx/cara-setting-standar-program-pabx-panasonic-tda-menggunakan-telephone/#ixzz2tBdXhK87

PABX and How It Works

PBX stands for Private Automatic Branch eXchange . A PABX is basically a regular phone system is also called the switchboard is used as an internal telephone system in the office . Simple picture PABX System PABX systems have several / many cable connections that lead to a switchboard . That is why there is the term " branch " in the PABX extension , because the " branch " or branch refers to the number of connections that are connected to the PABX . Tool PABX is an advanced technology because it can be used as a telephone , modem and fax machine , and can be used as a means of internal communication in the offices . How it works PABX is that this device is actually a modem that serves as a central control station . Every time there is a new incoming call , the phone will be routed ( directed ) through the control station . Because in the PABX system has entered a specific code for each phone number at the office , or for each extension , the incoming call will be routed to the proper destination by using the code . Example Uses PABX in office PBX can also be programmed so that the greeting will appear automatically whenever an incoming call directed to the destination before the concerned . For the purpose of the fax function , you can program the connection through the control station , going into a fax machine , or even to different destination fax number . Modern PABX system can even be programmed with a computer to keep track of every incoming and outgoing calls . This system can even be set anyone who may perform calls to certain destinations . PABX can also be used to determine the use of improper employee phone . PABX can also be used as Auto Attendant , a feature that directs incoming callers to specific destinations automatically. This feature is particularly suitable for large scale businesses that always receive incoming calls in large numbers every day . You can also take a conference call using the PABX .